Warhammer Laspitol Cosplay Prop – Resin Cast

Sale!

$265.00

Pew Pew Pew! Warhammer Laspitols! Get your Warhammer laspitol!

A Warhammer Laspistol design inspired by the Kantrael pattern lasgun. This Warhammer Laspistol is approximately 29cm/11.4″ long and is primarily cast with polyurethane resin (main body, sights, muzzle, handle) with a few 3D printed parts (rare plate, battery/magazine ejection buttons), an aluminium sight tube, and steel screws. This Warhammer Laspistol has a nice weighty feel at approx 500 – 600 grams (17.6 – 21.2 oz).

Removable friction fit laspistol battery/magazine (but be careful it doesn’t wear off the paint during hurried reloads). Room has been made in the design for you to fit a couple of rare earth magnets if you decide your las pistol battery/magazine needs a more secure fit.

SKU: laspistol Category:

Description

In making this I tried to work in some “real world” features that wouldn’t normally have been on a laspistol meant for a small figureine, to simulate how the laspistol might have been assembled or dissasembled for cleaning, maintenance or repair. This includes;

  • A seam to make the pistol comprised of 2 “shells”
  • Screws to hold the shell together
  • Screws in the bottom of the battery/magazine
  • Power switch and power level
  • A power level slider big enough to be used during combat, and – and + symbols that are recessed (paint could get rubbed off)
  • A muzzle tip that looked to be made up of more than 1 part (eg outer shroud, outer barrel, inner barrel)
  • Textured hand grip
  • Seams for the front and rear sights, to simulate removability

All Warhammer Laspistols are tested in the field before shipping, as evidenced by the worn and weathered appearance. Sorry – I don’t have time to clean them up afterwards.

Note colour tone and weathering may vary between productions. Photos taken with a warm yellow light nearby. Choice of screws may also vary.

FREE: You get 1 small wax seal.

Shipped from Australia.

Allow minimum 4 weeks for production as these are “made to order”. I still have my day job 🙂

Get in touch if you’d prefer a raw kit at a lower price.

 

 

 

Disclaimer
This cosplay prop is completely unofficial and in no way endorsed by Games Workshop Limited. All associated material from the Warhammer 40,000 universe are either ®, TM and/or © Copyright Games Workshop Ltd 2000-2020, variably registered in the UK and other countries around the world. Used without permission. No challenge to their status intended. All Rights Reserved to their respective owners.

Additional information

Weight 1000 g
Dimensions 36 × 10 × 22 cm

Leave a Reply

Your email address will not be published.

*